Yes, you can change to a longer fork on a Suzuki Marauder, but it’s important to ensure compatibility with your bike’s geometry and handling. A longer fork may affect the bike’s stability and steering, so consider the impact on ride quality. Additionally, you'll need to check for clearance with the wheel and fender. It's recommended to consult with a mechanic or specialist to ensure proper installation and safety.
need question asked on a 1998 suzuki 800 marauder how much fork oil needed
use the key
The fork oil capacity for a Suzuki GZ125 Marauder is typically around 410 ml (14 ounces) per fork leg. However, it's always recommended to consult the owner's manual or a service manual for the most accurate specifications and any specific instructions regarding fork maintenance.
vl250 fork oil quantity
gr650 is 8.9 oz.per fork, gr650x is 7.8 oz.per fork
14oz per fork
227ml per fork
The front fork tubes in a 1996 Suzuki Intruder VS 800 are 40mm.
644 millilitres per fork leg
To change the fork seals on a Suzuki Bandit 1200, start by removing the front wheel and brake calipers, then detach the forks from the bike. Use a fork seal driver tool to carefully remove the old seals and clean the fork tubes. Install the new seals, ensuring they are seated correctly, then reassemble the forks with fresh oil. Finally, reinstall the forks onto the bike, reattach the wheel, and ensure everything is tightened to the manufacturer’s specifications.
yes it takes 135mL of SAE15 fork oil
what is the capacity or how much fork oil does a vz800 take ?