Adding a 6th gear to a Kawasaki Vulcan 900 is not a straightforward modification and typically requires extensive mechanical work, including changes to the transmission system. Because the Vulcan 900 is designed with a specific gear ratio, retrofitting an additional gear would involve custom engineering and potentially significant costs. It’s often more practical to explore aftermarket solutions or consider a different model designed with a 6th gear. Always consult with a professional mechanic before attempting such modifications.
No not at alll
9.9
The 2009 Kawasaki Vulcan 900 has a curb weight of approximately 540 pounds (245 kg). This weight includes all fluids, such as oil and a full tank of gas, making it ready for riding. The Vulcan 900 is known for its balance and maneuverability, contributing to its popularity among cruiser motorcycles.
I have a 2007 Vulcan 900 and I got only 125 miles off a tank of gas. I was on the hwy and driving between 75-80 mph
all us recalls can be found on http://www-odi.nhtsa.dot.gov/recalls/recallsearch.cfm
The Kawasaki Vulcan 900 typically runs on regular unleaded gasoline with an octane rating of 87. Using higher octane fuel is not necessary and does not enhance performance for this motorcycle. Always check the owner's manual for specific fuel recommendations and guidelines.
remove seat. remove tool case. Remove terminals from battery, lift out.
This hf303 oil filter is for kawasaki motorcycles. It will fit the vulcan 900 engine,not sure about other engine sizes.
It takes almost exactly a gallon. Just did my oil change on a 2006 Kawasaki Vulcan Classic 900. It was just over a gallon, but a gallon worth was good enough.
The Kawasaki Vulcan 900 typically requires about 3.5 quarts (approximately 3.3 liters) of oil when performing an oil change with a new oil filter. Always refer to the owner's manual for the specific model year for the most accurate information, as capacities can vary slightly. Ensure to check the oil level with the dipstick after filling to confirm it's at the correct level.
It's under the left side cover. Take the seat off and remove one screw and then the side cover pulls right off.
To change the battery in a Kawasaki Vulcan 900 Classic, first ensure the motorcycle is turned off and parked on a stable surface. Remove the seat by unscrewing the bolts or using the latch, depending on the model. Disconnect the negative (-) terminal first, followed by the positive (+) terminal, and then remove the old battery. Install the new battery by connecting the positive terminal first, followed by the negative terminal, and reattach the seat securely.