Fitting a GN250 engine onto a 125 frame is generally not straightforward due to differences in size, mounting points, and weight distribution. The GN250 is larger and heavier, which may lead to structural issues or handling problems. Additionally, modifications would likely be needed for the frame, as well as adjustments to the electrical and exhaust systems. It's usually more practical to use an engine and frame designed to work together.
Will a 94 rm 125 engine fit on a 2000 rm frame?
No a 125 frame is too small to fit a 250 motor but with a cutting torch and a welder anything is possible.
yeah
yes it can i have done it
The TS125 engine will fit straight into the TS100 frame. My TS100 has a 125 in it and it rides very well.
any 71 chevelle body should drop onto that frame as I believe they used the same frame.
The 125 forks should fit the 250 as long as they are both the same frame style and close years.
nope. You problably could by doing some frame cutting .
no it won't the body mounts were different
Yes, a 1995 RM 125 motor can fit into a 1990 RM 125 frame, but there may be compatibility issues that need to be addressed, such as mounting points, wiring harness connections, and exhaust alignment. It's essential to check specific measurements and components, as well as potential modifications required for a proper fit. Overall, while it's feasible, careful consideration and adjustments may be necessary for a successful swap.
1973-1977.5
no, a California king is longer and narrower than a reg. king. the frame would be short on the sides and length