answersLogoWhite

0

Yes, for a 1985 Yamaha Warrior quad, you should mix oil with the gas. This model typically requires a pre-mixed fuel-to-oil ratio of 32:1, meaning 4 ounces of oil per gallon of gasoline. Always use high-quality two-stroke oil to ensure optimal performance and engine protection. Be sure to check the owner’s manual for specific recommendations.

User Avatar

AnswerBot

2w ago

What else can I help you with?

Related Questions

What is the gas mileage for a 2004 yamaha star warrior motorcycle?

45 MPG combined.


What kind of gas goes in a 1989 350 Yamaha warrior?

the kind at the pump, liquid perhaps...


What is gas to oil mixture for a 1985 Yamaha Phazer?

50:1


Do you mix gas and oil in a 1985 225dx Yamaha 3 wheeler?

No it is a 4 stroke


Where is the spark plug on 2000 Yamaha warrior?

It should be under the gas tank or slanted above the exhaust pipe on the front of the motor.


What kind of gas does a 1989 Yamaha 350 warrior take?

I have an 86 and I use supreme gasoline in it. Octane boost is good once in awhile too!


What kind of gas does a Yamaha blaster?

Yamaha Blasters take unleaded gas only.


How does your Suzuki 250 quad runner get gas?

How Suzuki 250 Quad Runner Gets GasThe Suzuki 250 Quad Runner get gas from the tank through the pit cock into the carb through the intake and into the head.


How do you remove the gas tank on a 2009 Yamaha V Star 950?

How to remove gas tank on a 950cc 2011 yamaha


What is the correct fuel oil mix for a Yamaha yfm 200 ATV?

i have a 1985 Yamaha yfm 200, it is gas, no fuel/oil mix needed. just put in 93 octane. unless u have a 2 stroke then its usually a 50:1 or 40:1 mixture


What is wrong when a 200 Yamaha blaster spits oil out breather?

my warrior spit out a gas and oil mixture out of the breather because the gas shut off wasnt working and the carb was letting the gas leak by so it actually pretty much overfilled the engine so bad it would fill the air box witht his mixture


Why does gas leak from a Yamaha razz muffler?

If gas is leaking from a Yamaha Razz muffler, then the float may not be set correctly. This means that it is not shutting the intake off.