No, It should be tight. The older model Rincon Disc is a two piece design that is riveted together. When they loosen you get a ugly vibration when you brake. Just buy the upgraded part and you'll be good.
Vti - rear and front disc brake engine b16 15' wheels esi - front disc brake only engine d16 14' wheels
You will need to remove the tire and wheel from your 1986 Honda Accord. Remove the brake caliper and the brake spring. The disk brakes will come off. Reverse the process to install the new front disc brakes.
above disc brake, above frame rail
You can get them at almost any Auto Parts Store.
19mm for front and 8mm for rear on 2002-2005 models
disc brake components
The rotor is the disc in the disc brake system.
Disc brakes. Ask the auto parts store for OEM brake pads.
Directly behimd disc brake on top of back frame rail
worn thin
In case of cost..drum brake is better than disc brake.
Converting a rim brake wheel to a disc brake system involves replacing the wheel hub with a disc brake-compatible hub, installing a disc brake rotor, and attaching a disc brake caliper to the frame or fork. This process may require specific tools and expertise, so it is recommended to consult a professional bike mechanic for assistance.