Remove the clutch cover , you might have to remove the left floorboard to remove the cover . The rear clutch can easily be removed by removing the bolt in the middle and pulling it straight outward . The front clutch requires a puller that screws into the center of the clutch .Removal without a puller will result in clutch damage .
The Valve Lash for a Polaris Magnum 330 or a Trail Boss 330 is .006 on the Intake & .006 on the Exhaust.
fuse bx location Polaris 330 magnum 4x4
The fuse box on a Polaris 330 Magnum is typically located under the front hood, near the battery. You may need to remove a plastic cover or panel to access it. Always refer to the owner's manual for specific details related to your model.
Remove the cables from the starter. Remove the starter retaining bolts. The starter will come off. Reverse the process to install the new starter.
.036 inches
1.9 qt
In the Polaris Magnum 330, the battery is typically located under the seat. To access it, you usually need to remove the seat by unfastening any clips or bolts. Once the seat is removed, you should see the battery secured in a compartment or tray. Always consult your owner's manual for specific instructions related to your model.
My 2005 Polaris Magnum 330 4x4 will top out around 35mph on a sandy road, so on pavement it might go a little faster then that.
My 04 300 2x4 has a top speed of about 45mph.
There are several websites available that have parts and peices of Polaris manuals on them. To answer your question though I would need to know what year your Polaris is.
Polaris produced the Magnum 330 4x4 from 1999 to 2005. This ATV was designed for both utility and recreational purposes, featuring a reliable engine and robust construction. It became popular for its versatility and performance in various terrains.
You will need to remove the oil pan plug. Allow the old oil to drain out. Replace the oil pan plug and fill with new oil.