To unseize a valve, start by applying a penetrating oil, such as WD-40 or PB Blaster, to the valve's stem and seat. Allow the oil to soak for at least 15-30 minutes to loosen rust and debris. Gently tap the valve with a rubber mallet to help break any bonds, and then try to turn it slowly with a valve wrench or pliers. If it still doesn't move, you may need to repeat the process or consider heating the valve carefully to expand the metal, but be cautious not to damage surrounding components.
most likely sieze your engine need to get it unseized if the damage is not too bad
Hello,I found the problem.I opened it with a crowbar,then I unseized the latch and plenty of penetrating fluid.Thank you
It is about a middle-aged man named Tommy Wilhelm who has been left with almost nothing in his life after a divorce, minimal contact with his children, and financial troubles. He reflects on his life full of unseized days.
Valve pocketing is when a valve is hammering the valve seat.mostly due to miss adjusted valve spring/wrong valve spring/to strong of a valve spring or valve stem to short.Makes the valve seat deeper.
tricuspid valve,bicuspid valve and pulmonary valve
A valve spring "keeper" or AKA a valve spring "retainer" is used to lock a valve spring to the valve.
# The PCV valve is located in the valve cover # Detach the hose from the valve then unscrew the valve from the valve cover
Spill valve is a overflow valve.
Ileocecal valve
The valve guide is a precise hole in the head that the valve stem slides in. The valve is retained by the retainer and two valve locks.
left atrioventricular valve and left mitral valve
the triscuspid valve is the valve in a bathroom sink.