The H isn't the letter H, but a range where the spark should be firing. T is the letter T, and stands for timing. The I should be right nevt to the T, and this is your timing mark. Confirm this by putting something in the spark plug hole as you SLOWLY turn the motor by hand. You can feel the piston come to TDC. TDC should coincide with the timing mark on the rotor. Once that is set, you can make sure your cam is where it should be and you're all set!
10w 40 ATV oil
21.8~22.8mm
valve settings on a 2008 yamaha ttr 125
adjustmen
Intake: .004-.006 Exhaust: .006-.008
about the consistency of mud and make sure you grease the muffler bearing
The top speed is around 40 mph (60 kilommeters per hour).
not sure where it is located but yes u need it to register it
The Yamaha Breeze 125 has a top speed of approximately 40 to 45 miles per hour (64 to 72 kilometers per hour). This speed can vary based on factors such as rider weight, terrain, and overall maintenance of the ATV. It's designed primarily for utility and recreational use rather than high-speed performance.
Yamaha Breeze ATV engine valve settings "Cold Engine" Intake valve .003 to .005 thousands. Exhaust valve .004 to .006 thousands.
The Yamaha Breeze 125 has a top speed of approximately 55 to 60 miles per hour (88 to 97 kilometers per hour). This ATV is designed primarily for recreational riding and utility tasks, emphasizing stability and ease of handling rather than high-speed performance. Its engine and design cater to a balance of power and control for various terrains.
On a Yamaha 125 Breeze, the oil filter is typically located on the right side of the engine, near the bottom. It is usually positioned just above the oil drain plug and may be accessible from the side of the bike. To replace it, you may need to remove any covers or components that obstruct access. Always refer to the owner's manual for specific details and guidance.