To adjust the valve clearances on a GN 125, first, ensure the engine is cool and remove the valve cover. Rotate the engine to set the piston at Top Dead Center (TDC) on the compression stroke for the cylinder you're adjusting. Use a feeler gauge to check the clearance between the rocker arm and the valve tip, adjusting the clearance by loosening the lock nut and turning the adjuster screw until the specified clearance is achieved. Finally, re-tighten the lock nut, recheck the clearance, and replace the valve cover.
The top speed is 70mph.
Q: What are the clearances of inlet and exhaust valves of Suzuki GN 125, and how to adjust the valve clearance. A: I'm giving an approximate answer since none is given here. I've just started doing this and don't know all the terminology. Please improve the answer if possible. :) You have to open the two caps hiding the valves on top. They are size 17. Also open the little bolt in front so you can look inside the motor for the "dead point" while rotating the motor manually. The adjustment is done with a flat screwdriver and the clearance should be between 0.08-0.13mmon both inlet and exaust. You have to use thos flat metal thingies to measure the clearance.
174cc per leg
.gn was created in 1994.
GN Software was created in 2003.
gn -3
.gn is for the Republic of Guinea in western Africa
Its most likely the spark plugs getting wet, mine conks out simetimes in the rain
Some French words that have "gn" in them are "gnocchi" (a type of pasta), "mignon" (meaning cute or adorable), and "agneau" (meaning lamb).
Graduate Nurse
the text/slang word 'gn' means good night.
The phone number of the Gn And A Depot is: 870-898-2758.