0
the Murray mowers that iv'e seen have Briggs engines in them. go to www.briggsandstratton.com and call the customer service number with the engine model and serial number. they can give you the initial settings for the high and low speed adjustments. you can probably find a tune-up manual in the library, if you're that handy. be sure there is no crap in the carb (water, debris, shallac), because if nobody has been fooling with it, that is likely the source of the problem.
What else can I help you with?
How do you adjust carbon 1996 Murray 12 hp riding lawn mower?
It is important to adjust the carb on your 1996 Murray 12 HP riding lawn mower from time to time. You need to start with a warm engine, and adjust the screws to make them tight.
How do you change the clutch spring on a Murray riding lawn mower?
how to install a spring clutch on a murray mower
How do I adjust a carburetor for a Murray 3.5 hp push mower?
To adjust the carburetor on a Murray 3.5 hp push mower, first, ensure the engine is off and cool. Locate the idle adjustment screw, usually found on the carburetor, and turn it clockwise to increase the idle speed or counterclockwise to decrease it. Start the mower and let it run; fine-tune the screw until the engine runs smoothly at idle without stalling. Additionally, check the air filter and fuel supply for optimal performance.
How to Adjust brakes on Yardman riding mower?
How to adjust brakes on a yardman lawn mower
Adjust timing on a riding lawn mower?
No
What size belt goes on a Murray Riding Lawn Mower - 12.5 HP 40 Cut Lawnmower?
what size belt do i need with a murray riding lawn mower that is a 12.5hp. 40"
How do you adjust the valves on a Murray riding mower with a Briggs and stratton 14.5 hp overhead valves?
This video will show you how: http://www.youtube.com/watch?v=NjzX-PUjKmo
Where can you find a manual for a 1984 42 Murray riding mower?
A Murray riding lawnmower owners manual can be obtained from most Murray riding lawnmower dealerships. You can find the owners manual at most local libraries.
What kind of oil do you use in Murray riding lawn mower?
30W for summer
What is the spark plug gap on a Murray 12 hp riding lawn mower?
The spark plug gap for a Murray 12 hp riding lawn mower should be set at .020 inches. This is equal to .5 mm.
The installation diagram for a murray 12.5hp 38inch cut riding lawn mower?
To install a Murray 12.5hp 38-inch cut riding lawn mower, first ensure the mower is on a flat surface and the engine is off. Attach the mower deck by aligning it with the mounting brackets on the chassis and securing it with bolts. Connect the drive belt according to the diagram, ensuring proper routing around pulleys. Finally, check all connections and adjust the mower height as needed before starting the engine.
What is the spark plug gap neede for Murray 14.5 HP riding mower?
.20
