0
I believe 1200 with carb. If so, look on the right side, ( foot brake side ), right where the throttle cable meets the carb. you will see a small screw there, just turn either way and follow your tach. Normal rpm for the 1200 is 900 + - 100. I run mine around 1000 to 1050. Just a really great machine. Need more info, send to message board. Good luck
What else can I help you with?
Where is the carburetor idle adjustment on 1987 Honda Goldwing Interstate?
If you look on the foot brake side, just where the cable meets the carb, there is a screw a little further in, that will adjust the idle. Use a long screw driver.
How do you set the idle on a 1987 Chevy Celebrity?
The idle speed on a 1987 Chevy Celebrity is controlled by the engine computer, there is no way provided to adjust it.
What would cause a 1987 Chevy s 10 to die while in idle but not die when excelerating?
carb problems, adjust the idle screw and see if that helps
How do you adjust a mercury 150 outboard boat motor idle?
You adjust idle with idle timing
How do you adjust idle in the Mitsubishi diamante?
Adjust idle on Mitsubishi diamante
What can cause 1987 5.0 Bronco to idle high 1200-1500rpm when placed in park?
Check your TPS TPS = throttle position system
How do you adjust the idle speed on a 2001 Subaru Forester and what should the idle speed be?
how to adjust idle on 2001 legacy
How do you adjust the idle for a 1987 accord carburetor?
On the rear of the carb there should be a black plactic knob on a shaft with a spring. You will probably have to take the air cleaner housing off. Tightenen to idle up, loosen to idle down.
How do you adjust idle speed for Toyota supra?
you can adjust it via the idle control valve.
What should your dodge idle at?
Idle speeds can vary from 500 to 1200 rpm
What is the idle speed of a 1998 Chrysler cirrus lxi 2.5 liter engine?
The computer controls idle speed between 600-1200 rpm.The computer controls idle speed between 600-1200 rpm.
How do you adjust idle on a Yamaha 1200XLwaverunner?
To adjust the idle on a Yamaha 1200 XL Waverunner, locate the idle adjustment screw, typically found on the throttle body or near the carburetors. Start the engine and allow it to reach operating temperature. Then, use a screwdriver to turn the idle adjustment screw clockwise to increase the idle speed or counterclockwise to decrease it, ensuring it idles smoothly at the recommended RPM specified in the owner's manual. Always make small adjustments and test the idle after each change.
