there is a adjustment screw where the throttle cable attaches to the EFI throttle body.
10w30
.035 in
The 1991 and 1994 Ford Explorers only factory available engine was the 4.0 L OHV Checking www. motorcraft. com ( no spaces ) Both the 1991 and 1994 Ford Explorers , with 4X4 , list the same part number for an A4LD automatic transmission
it depends on the bolt patterns but don't c y not but if its a 4x4tranny it may not if the Mazda isn't a 4x4
Adjust carb on 400 Polaris 4x4 2stroke
First engine ? 5.8L v8? no mounts are different between both now tranny is it 5sp or auto
Screwed into the engine block under the distributor.
The 1994 Chevy K1500 4x4 truck with a 350 engine is typically equipped with a 4L60E automatic transmission. This transmission is a four-speed electronically controlled unit, commonly paired with the 5.7L V8 engine. It provides improved performance and fuel efficiency compared to earlier models.
with the truck running, put it in neutral then shift the four wheel drive lever into either 4hi or 4lo you should be able to hear it go in if it grinds wait for the engine to idle down then try again. make sure the truck is in neutral
Only if the van is a 4x4 too.
Stop by the dump and have it weighed...Tombo
If 8th digit in VIN is the same, then yes