under the carb you will see a little black knob. turn it which ever way until the idle gets to the way you want it
How do you adjust carburetor 300 honda fourtrax?
To adjust the idle on a 1998 Honda Fourtrax, locate the idle adjustment screw, typically found on the carburetor. Start the engine and let it warm up, then turn the screw clockwise to increase the idle speed or counterclockwise to decrease it. Aim for an idle speed around 1,200 RPM, ensuring the engine runs smoothly without stalling. Always make small adjustments and recheck the RPM to achieve the desired idle speed.
adjust the Idle screw... im not sure where it is on the 1991 model but it exists...
Adjust the sprocket of the chain
Idle on a 1985 Honda Civic is adjusted through a idle air control valve. This valve is located near the intake. Adjust the valve by either loosen or tightening it.
To adjust the idle on a 2005 Honda Civic locate the idle control valve. The IACV and is found near the intake manifold. Open the top of the valve and tighten it to lower the idle or loosen it to raise it.
I need to adjust the the intake , exhaust valve. would you know how ?
If you are not able to adjust it down with the idle adjust knob you may have an airleak at the carb.
Honda Accord 1998-2002 model GEN 6 idle speed is control by internal computer. You need to bring it to the dealer to adjust this.
On the carb, on the bottom side facing out. should be a black knob you can turn with your fingers.
twist the screw under the carb
Go to the mechanic down the blocc