0
To adjust the valves on a 2007 Kawasaki Mule 610, first, ensure the engine is cool and remove the valve cover. Rotate the engine to the top dead center (TDC) of the compression stroke for cylinder 1, then check the valve clearance using a feeler gauge. The intake clearance should be between 0.10-0.15 mm (0.004-0.006 in) and the exhaust between 0.15-0.20 mm (0.006-0.008 in). Adjust the clearance by loosening the lock nut and turning the adjustment screw as needed, then recheck the clearance before reassembling the valve cover.
What else can I help you with?
How do you adjust the drive belt on a 610 kawasaki mule?
Take it to your nearest certified Kawasaki dealer...
Valves not moving on 1993 kawasaki mule?
Cam chain is broken or cam is shot
Adjusting governor to get more speed on 550 kawasaki mule?
You can adjust the governor, on your 550 Kawasaki Mule, by increasing the fuel to the carburetor. The fuel adjustment screw is on top of the governor.
How do you adjust a governor on a kawasaki?
If its on a golf cart or mule email me at gibsonvillepaul@yahoo.com and i will be glad to help you
How much is 3010 Kawasaki mule 3010?
how much for Kawasaki mule 3010 with 170 hrs
What is the oil capacity of a Kawasaki mule 610 motor?
I have a 2007 Mule 4x4 610 and the oil capacity is 1.5 U.S. quarts. (1.4 L.)
How do you make kawasaki mule go faster?
How do u make a kawasaki mule 1000 go faster
How do you remove stater selinoid on kawasaki mule 550?
How do you remove the starter selinoid on a kawasaki mule 550, 2000 model
Wiring Diagram For Kawasaki Mule 550?
The wiring diagram, of a Kawasaki Mule, 550, can be obtained from most Kawasaki dealerships. The wiring diagram can be purchased at most auto-parts stores.
Where is the battery located on a Kawasaki mule?
When changing your battery on your Kawasaki mule, it is best to take careful precautions. To ensure that you have the proper procedures and location, seek the advice of a certified Kawasaki mechanic.
What type of oil to use for kawasaki 610 mule?
The recommended type of oil to use for a Kawasaki 610 Mule is API SF. Th610 Mule will hold approximately 1.5 quarts of oil.
How do you change antifreeze in Kawasaki mule?
You open the hood on the front of the mule and it will be on the left side
