To adjust the valves on a Polaris Predator 500, first ensure the engine is cold and remove the seat and side panels for access. Rotate the engine to top dead center (TDC) on the compression stroke for the cylinder you are adjusting, then check the valve clearance using a feeler gauge. The intake valves should have a clearance of 0.004 inches, and the exhaust valves should have 0.006 inches. If adjustments are necessary, loosen the lock nut and turn the adjustment screw to achieve the correct clearance before tightening the lock nut.
How do you tighten chain on polaris predator 500?
where can i find a weiring diagram for a Polaris predator 500 [2007 m0del]
About 73
2003
roll engine over until the ( T ) mark is alighned in timing hole with piston to the top . adjust intake and exhaust to 0.15 mm or 0.006 in .
The engine in the Polaris Sportsman 500 is self adjusting. There is no need to adjust the timing chain on the Sportsman 500. If you are hearing the chain slap, it is time to replace the chain, not adjust it.
Only use Polaris oil or amsoil in any polaris.
The outlaw 525 by far
yes it has
the dry weight is about 415 lbs
they're not that fast. kinda slow
RTR