answersLogoWhite

0

What else can I help you with?

Related Questions

Change transmission oil in a Honda VTX 1300?

You dont change transmisión oil. The regular oil is all you need.


Do you have to remove two drain plugs on a vtx 1300 to change the oil?

You can remove the drain plugs, on your VTX 1300, by loosening the plugs with a 5/8 five sided socket. Turn the plugs to the left to remove them.


Where are the tools on a vtx 1300?

How many amps vtx 1300 battery


What state was the Honda vtx 1300 made?

The Honda VTX 1300 was manufactured in Japan. Specifically, it was produced at Honda's facilities in Kumamoto, where many of the company's motorcycles are assembled. The VTX 1300 was popular for its cruiser style and was part of Honda’s VTX series, which was known for its performance and design.


Where should the oil be on the dipstick of a Honda vtx 1300 after an oil change?

After an oil change on a Honda VTX 1300, the oil level should be between the upper and lower marks on the dipstick when it is fully seated. To get an accurate reading, make sure the motorcycle is on a level surface and the engine is warm but not running. Remove the dipstick, wipe it clean, reinsert it fully, and then check the level to ensure it’s within the proper range. If the oil level is low, add oil gradually until it reaches the correct level.


What is horsepower of a VTX 1300?

about 76hp


What type oil for Honda VTX 1300?

20W-50, I use Castrol 4T from my 06' VTX. Most motorcycles are not specific on oil types. Refer to your manual regarding any other model or displacement.


Would VTX 1300 motorcycle pipes fit on a Honda shadow spirit 1100?

will 750 shadow pipes fit 1300 vtx


Honda vtx 1300 battery?

YTX14-bs


What is the voltage of a battery for a VTX 1300?

12 volt


What does VTX and RT stand for on a Honda VTX 1300 RT?

V Twin Extreme Retro Touring


How do you change spark plugs on a Honda vtx 1300?

The spark plugs in a Honda VTX 1300 can be removed by first removing the spark plug wire. Twist the spark plug out, using a spark plug socket. Reverse the process to install the new spark plug.