To change the chain on a Raptor 350, first, elevate the ATV securely and remove the rear axle nut and wheel to access the chain. Use a chain breaker tool to remove the old chain, then thread the new chain through the sprockets, ensuring it is properly aligned. Adjust the tension using the chain adjusters on the swingarm, then reassemble the rear wheel and axle. Finally, check the chain's tension and alignment before taking the ATV for a test ride.
The raptor 350 by ALOT
The raptor 350 is slow. My 2008 Ktm85sx beat it. never by a raptor.
the raptor 350 is faster but not by much
the raptor quad is made by yamaha
No, Raptor 250 A-arms will not fit a Raptor 350. The Raptor 250 and Raptor 350 have different frame designs and suspension geometries, which means their A-arms are not interchangeable. If you're looking to upgrade or replace A-arms, it's best to use parts specifically designed for your model.
I have a gps and a stock raptor goes 62
5 gears, the raptor 350 has 6
There is no 450 Raptor, it is either a Raptor 250, 350, 660 or 700. If it is a 450 then it is a YFZ.
There is no 450 Raptor, it is either a Raptor 250, 350, 660 or 700. If it is a 450 then it is a YFZ.
the raptor 250 runs in circles around the 350 the 350s chassis is so much bigger and the body is the size of a 700 so it ways it down
the banshee 350 is faster. nope Yamaha raptor 700r is faster look it up on youtube.
Well the raptor 350 is basically the same quad as the warrior 350 with different plastics but newer version. it has the same frame motor/trans. the warrior makes 21 hp so i think the raptor has 21 hp.