Turn bike off, disconnect switch from the wiring harness, unscrew the switch from the cylinder, clean the mounting threads, and attach the new switch.
Depends on the year, normally it's 56 brake horsepower
If you have to ask: by taking it to a mechanic.
DOT 5 is best, do not mix or use dot 4 or dot 3/
The Chevrolet Colorado brake light switch is quite simple to change. The brake light switch simply plugs in and out.
i have 1983 sportster when ign key is in 1st position no lights are on as should be but when i apply the brake head light comes on when key is in second position head light is on as should be but brake light and running light are on also any cules what to look for
how to change brakes on a 2003 dyna wide glide.
Were and how do you change a brake light switch on a Daewoo Leganza 2001
front brake light switch is in housing behind the brake lever, rear switch is on left side of bike( as though you are sitting on it) under the oil tank, just follow the brake line as it is a hydralic swith "T"ed in to the rear brakes
Yes
The brake pedal switch is bad. How do I replace it?
how to change brake light switch in a 2007 chevy colorado
Check your brake light switches. Chances are its the front one. The clip that holds the switch in place may have fallen out or the lever isn't hitting the switch.