0
The drain plug is a large one, slightly to the rear of the center of the engine. When you remove it, be careful not to lose the screen, spring, and o-ring inside of it. Clean the screen and plug in gasoline or other solvent, being careful with the o-ring (some solvents will eat rubber).
Coat the o-ring with clean oil. Refill on the right side of the motor, being careful not to overfill.
What else can I help you with?
Where is the VIN number for a 1999 Yamaha 350 wolverine?
The VIN number of a 1999 Yamaha 350 Wolverine?æis located on the bottom of the frame. The number will be near the front.
Does a 1996 Yamaha 350 4x4 wolverine have reverse?
Yes, There is a knob in between the handle bars that you turn when it is in neutral and shift down.
Will Yamaha raptor plastics fit on a Yamaha wolverine 350?
No, Yamaha Raptor plastics will not fit on a Yamaha Wolverine 350. The two models have different frame designs, dimensions, and mounting points, making their plastics incompatible. If you're looking to replace or upgrade plastics, it's best to use parts specifically designed for the Wolverine 350.
Where is the fuel filter on 1998 Yamaha wolverine 350?
there is not one on this machine
What is the top speed of a Yamaha 350 wolverine?
about 45-50mph
What is the valve settings on a 97 Yamaha 350 wolverine?
4 on the intake and 8 on the exhaust
Where you the vin on a Yamaha wolverine 350?
bottom of the frame towards the front
How do you replace the rear collar bearing on a wolverine?
how to rea place the rear collar bearing on a 2001 yamaha wolverine 350 4x4
Is a 1999 Yamaha wolverine 350 pull start or kick?
i have an 05 it is electric and pull start
Why does my Yamaha wolverine 350 run good yet have no power?
Has no compression needs new rings
What is the spark plug gap on a 1999 350 Yamaha wolverine?
Generally, .028" unless you have a weak stator or coil.
What is the Top speed of a 2008 Yamaha Wolverine 350?
mine tops out at 62 with a fmf pipe.. so stock around 50-55
