Assuming it is a 2 stroke 250, start the bike up and let the oil warm up (side of the cylinder should be pretty warm to touch) before killing engine. Remove drain plug (on bottom of engine) and let all oil run out. Replace drain plug and remove filler plug on side of cases and add oil. If it is a 4 stroke you will have an oil filter to change after draining the oil.
According to the 2011 Ford F-250 Owner Guide : With engine oil filter change : ( 7.0 quarts ) for the 6.2 liter gas engine
No you dont. Transmission & Engine oil are chared in a 250 Rebel! just make sure you change your engine oil regularely...every 1000Miles or so...
( 6 quarts ) with engine oil filter change
On a Ford E-250 , 4.6 liter V8 engine : With engine oil filter change : ( 6.0 U.S. quarts / 5.7 litres )
i have to change oil pump f250 351winsar.how topull the engine out?
The 2010 Ford F-250 owner Guide shows : 7 quarts ( 6.6 liters ) with engine oil filter change
According to the 2003 Ford F-250 owners manual : For the 5.4 liter V8 and the 6.8 liter V10 gas engines : With engine oil filter change : ( 5.7 liters / 6.0 quarts of engine oil )
7.0 quarts ( 6.6 liters ) with engine oil filter change , according to the Owner Guide
The engine oil capacity is 1.2 US Quarts for an oil change and 1.3 US quarts with an oil and filter change per the owners manual.
( 6 quarts ) WITH ENGINE OIL FILTER CHANGE , according to the owners manual
With engine oil filter change ( 5.7 liters / 6 quarts )
According to the 2012 Ford E-250 Owner Guide : For the 4.6 litre gasoline V8 engine : With engine oil filter change : ( 6.0 U.S. quarts / 5.7 litres of 5W-20 engine oil )