To change the rear differential oil on a Yamaha Grizzly 660, first ensure the ATV is on a level surface and secure it with a block. Remove the drain plug from the rear differential and allow the old oil to completely drain out. Replace the drain plug, then remove the fill plug and use a funnel to add the recommended differential oil until it reaches the fill hole. Finally, replace the fill plug and check for any leaks.
front or rear diffs take approximately 320cc. fill the diffs till the oil runs out the filler hole, it will find its own level.
where is the engine number on a grizzly 660
Where do you add water in the Yamaha grizzly 660?
Well grizzly 660 motor work on a rhino
The coolant system capacity of the Yamaha Grizzly 660 motorcycle is 0.32 quarts. This is equivalent to 0.30 Liters.
The VIN is located on the bar in between the front 2 wheels of the Yamaha Grizzly 660. The VIN will be displayed on a green sticker.
The serial number for a Yamaha Grizzly 660 is typically located on the frame, near the rear of the ATV. Specifically, you can find it on the left side of the frame, just below the seat or around the rear axle area. It may also be found on a label attached to the frame. Checking your owner’s manual can provide more precise guidance on its location.
42 hp
Its under the seat.
10W40
its in the vin
Jy4am03y14c048992