To change the belt on a 2008 Arctic Cat 500 Auto, first ensure the vehicle is on a flat surface and secure it with the parking brake. Remove the plastic cover on the clutch by unscrewing the bolts, then take off the drive clutch cover. Use a belt removal tool or your hands to compress the clutch and slide the old belt off, then place the new belt onto the primary and secondary clutches. Reassemble the clutch cover and ensure everything is securely fastened before testing the ATV.
try this link how to change a belt in under a min. http://www.silvercliff.com/tech/tech1.html
timing belt change 2008 civic
In the trunk at the back of the sled.
150,000km
when should i change the timing belt on a mercury villager
how to change timing belt mercedes benz E200 1.8L 2008 model
it is auto timed thru the cam shaft and crankshaft sensors.You cannot change it. The timing belt has timing marks when you change the belt in which you line up the crank and cams.
To change the drive belt on an Arctic Cat 500 ATV, start by removing the plastic cover over the drive belt to access it. Next, take off the clutch cover and use a belt removal tool or your hands to compress the primary clutch, allowing you to slide the old belt off. Install the new belt by reversing the process, ensuring it is properly seated in both clutches. Finally, reattach the covers and secure them before testing the ATV.
105000 miles
60,000 miles , special tools required
you have to stretch the belt over the clucth
I have a 2008 Subara Impreza. When should i change the timing belt? Do i also need to change the cogs, tension bars and water pump??