It will depend on what kind of mtd mower you got but generally there is a bolt in the center of the blade that you take off and the blade will come right off. It is alot easier to take it off with an impact but if you dont have and impact you will have to put something to hold the blade and break lose that bolt and make sure when you put it together the blades go back on the same way and if the blades have any kind of bracket on it you put those back on the same way as well.
MTD
Ranch King is merely a brand name...the maker....MTD Products, Cleveland, Ohio.
On most MTD riders it is right by the seat hinge on the right side as you sit on the mower.
mower manuls are at this link http://manuals.mtdproducts.com/mtd/DocGetter?doc=769-00533.pdf
Hi, Most but not all are made by MTD.
With mechanical initiative.
Check the belt.
On a 2007 MTD Yardman riding mower, the pulley tension spring is typically attached to the deck engagement lever and the idler pulley. The spring helps maintain tension on the idler pulley to ensure proper belt engagement for the mower blades. To install it, locate the spring attachment points on the lever and idler pulley, ensuring it's securely connected for optimal performance. Always refer to the mower's manual for specific diagrams and instructions.
They are standard thread. Counter-clockwise to loosen.
I have the exact same mower and I use mobil 1 5w30 and it seems to work
how do you rout a belt for 42 inch master cut 13aj7955059
Standard blades and mulching blades are usually available at most stores like Lowes or Home Depot. They will be listed as blades for "MTD" mowers