To check the transmission oil in a 2004 Polaris Sportsman 500, first ensure the vehicle is on a level surface and the engine is off. Locate the transmission oil dipstick, which is typically found near the rear of the engine case. Remove the dipstick, wipe it clean, reinsert it without screwing it in, and then remove it again to check the oil level. The oil should be between the "Full" and "Add" marks; if it's low, add the appropriate transmission oil as specified in the owner's manual.
you would use polaris specified AGL fluid in the transmission
ignition wiring diagram 2004 Polaris Sportsman 600
Engine = 1900cc Transmission = 948cc Final Drive = 150cc
32oz in my 2004 Sportsman 400. After you add just check the level on the dipstick to see if you are in the right area.
step on the foot brake. then pull the shift lever to the desired gear.
Check and see if it has the same model number. If it has the same model number it should fit.
2004 polaris sportsman 400 has new starter, battery and selenoid but still won't start what else can it be
About 1300 RPM's
differentiel avant
5,000,000 dollars
if its water cooled it has a water pump!
There is no valves as it is a 2-stroke engine .