Bottom center of the motor. In between the foot pegs.
Premixyz says:
My daughters 97 has the drain plug behind the rear break lever. It is one of the engine cover bolts - 10mm with a copper washer. 500CC capacity.
The amount of oil that a Yamaha yz80 will holdÊdepends on the year. A 1996ÊYamaha yz80 crankcase holdsÊhalf a quart of oil.Ê
middle bolt right under crank cake side... where it says yamaha.. right under that.
20:1
plain 2 cycle oil
The fork oil capacity for a 1984 Yamaha YZ80 is approximately 220 milliliters (7.4 ounces) per fork. It's essential to use the recommended oil type, typically 10-weight fork oil, to ensure proper performance. Always check the owner's manual or service guide for any specific details or variations.
To check the oil in a Yamaha YZ80, start by locating the oil reservoir, which is typically situated near the engine. Ensure the motorcycle is on a level surface and the engine is off. Remove the cap and visually inspect the oil level through the sight glass, if available, or by inserting a dipstick. If the oil level is low, add the appropriate two-stroke oil until it reaches the recommended level.
If your YZ is a crankcase induction model say 1990 to 2008, it's usally 500ml by the book Hello: You need to let us know the year of your YZ80********
What is the gas to oil ratio fot a 1982 Yamaha PW50? Do you need to mix it manually or does it automatically mix together by putting straight gasoline in the gas tank and straight oil in the oil tank?
Jya2hf002ha003679 This is a 1987. want to know gas oil ratio 2000 yz 80 stock bike
The 1989 Yamaha YZ80 typically requires about 10.5 ounces of fork oil per leg. It's important to use the recommended viscosity, usually around 10W, for optimal performance. Always check the owner's manual for specific details and ensure proper servicing for the best results.
There is no oil filter.. The drain plug is on the left side of the bike.
Pull the oil plug located at the base of the oil pan.