To eliminate backfire on a Suzuki Savage 650, start by ensuring the carburetor is properly tuned and that the air-fuel mixture is correct. Check for any vacuum leaks in the intake system and ensure that the exhaust is free from obstructions. Additionally, inspect the spark plugs for wear or improper gaps, and consider upgrading to a performance exhaust or tuning the carburetor if modifications have been made. Regular maintenance, including adjusting the idle speed, can also help reduce backfire issues.
what is the spark plug gap size for a 1987 suzuki savage 650?
31
Accessing the battery on a Suzuki Savage 650 involves removing the plastic cover to expose the battery. This can be removed by hand without the use of tools. To remove the battery a standard wrench is needed.
The spark plug gap size for a 1986 Suzuki Savage 650 should be set at .4 mm. A new spark plug may be purchased at any auto parts retailer.
For savage 650 or 400 you should use chain 525. It strong enough to make your bike run well.
I use regular 10W 30 oil in mine
The manual of the Suzuki 650 Savage states that the required amount of fork oil is 441 cc or 14.91 oz. The recommended kind of fork oil is DEXRON ATF or SAE 15W.
Backfiring in a 2002 Suzuki Savage can be caused by several factors, including a clogged air filter, incorrect fuel mixture, or a malfunctioning carburetor. If the air-fuel mixture is too rich or too lean, it can lead to incomplete combustion, resulting in backfires. Additionally, issues with the ignition system, such as faulty spark plugs or ignition timing, can also contribute to this problem. Regular maintenance and inspection can help identify and resolve the underlying cause.
The Suzuki 650 Savage, also known as the Suzuki S40 Boulevard, typically requires about 2.5 quarts (approximately 2.4 liters) of engine oil when performing an oil change with a filter replacement. If you're just changing the oil without replacing the filter, it needs around 2.0 quarts (approximately 1.9 liters). Always consult the owner's manual for the most accurate information regarding oil capacity and specifications.
Yes, under the back fender above the tire there are two nuts that can be removed with a 10mm ratchet.
The torque of the Suzuki Burgman 650 is 54-60 Nm at 5000 rpm
ON or RES (if fuel low). Only use PRI to reprime carbs whenthey have been run dry/ serviced.