To fix a stuck choke on an LT230 quad, start by checking the choke cable for any signs of damage or corrosion. If the cable is intact, inspect the choke mechanism for dirt or debris that may be causing it to stick. Apply a penetrating lubricant to the moving parts and work the choke back and forth to free it up. If the issue persists, consider disassembling the choke assembly for a thorough cleaning or replacing it if necessary.
unclog it
To fix a stuck choke on a 2000 Astro Van, first, ensure the engine is cool and then inspect the choke linkage for any visible obstructions or damage. You can manually free the choke by gently moving it with your hand while checking for smooth operation. If the choke remains stuck, consider cleaning the carburetor and choke assembly to remove any buildup. If the problem persists, it may be necessary to replace the choke or consult a professional mechanic.
You probably have a stuck float or the carb is out of adjustment or choke is stuck on. hope this helps
To fix the automatic choke on a Rover 216, first, ensure the choke linkage is not stuck or obstructed. Check the temperature sensor and its connections, as a faulty sensor can prevent proper choke operation. Additionally, examine the carburetor for any signs of wear or damage; cleaning or replacing it may resolve the issue. If problems persist, consult a service manual for further troubleshooting or consider seeking professional assistance.
It usually needs a new choke pull-off.
Sing the song, you know Fix up locked brakes on Suzuki king quad 4 wheeler!
Make it faster
Black smoke is an indication that your engine is getting to much fuel the fix in short is to find what's causing the excess fuel and to make the necessary changes or repairs. , EzForJesus If it's carbuerated, your choke is stuck.
If you have a torch try adding heat and then while it is hot try to get it off not like red hot though .
the quad driver module is a component of the ECM. you must replace ECM.
Do you have a 4L 6 cyl.? if so, there is NO automatic choke. It is controled by computer and sensors.
You replace them!