0
What else can I help you with?
Can a riding lawn mower vapor lock?
yes
What happens when you start a riding lawn mower with out oil?
It depends on how long you let it run. If it is only for a couple seconds there will probably be no serious damage. If you run it for any extended period of time it will overheat the engine and lock it up and ruin the engine.
Why does your 6.5 hp Snapper Briggs and stratton riding mower stop running after it heats up then won't restart It has a new coil spark plug and rebuilt carburetor?
check location of gas line, heat may be causeing vapor lock, fuelpump going bad,
How do you start your riding lawn mower with a chokeWhere is the choke?
The choke on a riding lawnmower is typically a lever on the "dashboard." Often it is near the lock. The choke is used primarily when starting a riding mower that is cold and often it is not necessary to use the choke after the engine has been running. The choke, when engaged, allows more fuel and less air to reach the spark plug in the engine. The higher concentration of fuel is easier to ignite and thus the engine is easier to start. Once the engine is running and warm, the choke should be disengaged.
On your Ranch King lawn mower When engaging into drive or reverse system seems to lock up Why?
dheck tention on drive chain, probable too tight
where can you order replacement key for a White riding mower?
you can get a new one made from people like pop a lock i'd call first though
12.5 hp Briggs and stratton lawn mower and when it gets hot it cuts off why is that?
Three things come to mind: 1) The cooling fins that keep the engine cool are blocked by debris and letting the mower run hot. 2) The coil is getting hot and breaking down causing it to not get spark to the engine. 3) There might be an exhaus leak near the carb causing the gas to vapor lock.
What are engine vapor lock symptoms?
dodge lancer vapor lock
Remove vapor lock on craftsman lawn tractor?
For my Lawn tractor i just unscrewed the gas cap a bit and shook the rider back and forth with my hip. I had to replace my gas cap because the breathing function of it had worn out.
Blade bolt on your craftsman 5.5 rotary lawn mower keeps coming loose?
Install a lock washer between the head of the bolt and the flat washer that rests against the blade.
How do you adjust the seat on the craftsman riding mower model 917287120?
To adjust the seat on the Craftsman riding mower model 917287120, locate the adjustment lever beneath the seat. Pull the lever up to unlock the seat, then slide it forward or backward to reach your desired position. Once in place, release the lever to lock the seat securely. Make sure the seat is firmly in position before operating the mower.
When your Briggs 16.5 get hot it runs poorly and then shuts down?
A common problem with Briggs or any other lawn mower is vapor lock or insufficient oxygen. When the engine begins to bog down or become unstable, try loosening the gas cap to see if it will stabilize. If it does, then it means the gas-cap vent is clogged up or needs replacing.
