Use a bolt out the same as an easy out but for bolts & nuts. Craftsman sells a set for about $20.00
To effectively remove a stripped hex bolt using a bolt extractor, follow these steps: Select the appropriate size bolt extractor that fits snugly into the stripped bolt. Insert the bolt extractor into the stripped bolt and turn it counterclockwise with a wrench to grip the bolt securely. Apply steady pressure while turning the extractor to loosen and remove the stripped bolt. If the bolt does not come out easily, apply penetrating oil to help loosen it. Once the bolt is removed, clean the area and inspect for any damage before installing a new bolt.
Grab onto the head with the biggest pair of vise grips you have. Pull down on the pliers, then turn them counterclockwise to remove the bolt.
Ask the garage for a helicoil repair.
To efficiently remove a stripped hex bolt, you can try using a bolt extractor tool or a left-handed drill bit. These tools can help grip onto the bolt and turn it counterclockwise to loosen and remove it. Additionally, applying penetrating oil to the bolt and allowing it to sit for some time can help loosen the bolt and make it easier to remove.
If the top bolt of the fan belt is stuck and rounded off, first try using a rubber band or a specialized stripped bolt remover to gain extra grip. If that doesn't work, you can apply penetrating oil to loosen the bolt, then use a hammer to tap a smaller socket onto the rounded head to create a tighter fit. If all else fails, you may need to cut the bolt off with a Dremel tool or a similar cutting tool, taking care not to damage surrounding components. Once removed, replace the bolt and proceed with the fan belt installation.
either the thread on oil pan bolt is stripped or the washer on bolt needs replacing. easy fixonly oil additive i would recomend for any engine is LUCAS ENGINE OIL ADDITIVE
I presume you mean the head of the bolt is stripped. Try some vice grips or a pipe wrench, or use a grinder to put a flat spot on each side of it. There are also some special sockets you can buy that are made to grip anything. I am told they work rather well.
To remove a stripped hex bolt effectively, you can try using a screw extractor or a drill to create a new grip on the bolt. Another option is to use a penetrating oil to help loosen the bolt before attempting to remove it. It may also be helpful to use a heat source, such as a torch, to expand the metal and make it easier to remove the bolt.
To effectively use a stripped bolt remover to remove a stubborn bolt, first ensure the remover is the correct size for the bolt. Apply penetrating oil to the bolt and let it sit for a few minutes. Use the remover to grip the bolt and turn it counterclockwise with steady pressure. If the bolt is still stuck, try tapping it lightly with a hammer to loosen it before attempting to remove it again.
To effectively remove a stripped bolt from a piece of equipment, you can try using a few methods. One option is to use a bolt extractor tool, which is designed to grip onto the stripped bolt and twist it out. Another method is to use a drill to create a small hole in the center of the bolt and then use a screw extractor to remove it. You can also try using a pair of locking pliers to grip onto the bolt and turn it out. Remember to apply penetrating oil to help loosen the bolt before attempting to remove it.
To remove a stripped nut stuck on a bolt, you can try using a pair of locking pliers or a nut splitter tool to grip and break the nut. Another option is to use a penetrating oil to loosen the nut before attempting to remove it. If these methods don't work, you may need to cut the nut off with a hacksaw or use a drill to remove it.
Buy a new one at at dealer or parts store.