ive got a mini dirt bike that's a pull start,damn thing kills your arm.ive cheked about for convertions,but it says you cant on a pull start.you ave to get a battery and loads of convertion stuff.better to buy a electric started scooter anyway.hope this helps.
AnswerTry going to www.scooterparts4less.com. you will need the following and possibly more: battery, key ignition, electric start switch, electric peice that goes in the engine. I don't really suggest installing it yourself because it will get extremly frustrating, and it could break your scooter/minithing altogether, and that's not good.bolt it on the motor
buy one off the internet: it should have instructions about how to install.
There is a big difference in the performance between a gas scooter and an electric scooter. A gas scooter has a lot more power and can reach higher speeds than an electric scooter. That being said, the cost to drive an electric scooter is cheaper than gas.
a gas scooter it will go faster than an electric.
EBAY what type of scooter is it?
my 43 cc scooter has a 1/25 ratio
unleaded
Exchanging an electric scooter into a gas-powered scooter generally involves replacing the whole of the engine to a gas-powered engine. The only exception is a gas-powered fuel cell, which maintains the scooter's electric usage, but uses a fuel cell to generate the electricity.
How much does your gas scooter cost?
To wire an electric start on a 49 cc gas scooter, you'll typically connect the battery positive terminal to the starter relay, and then from the relay to the starter motor. The negative terminal of the battery should be connected to the scooter frame or directly to the starter motor. Additionally, a push button or key switch can be added to complete the circuit from the battery to the relay, allowing you to engage the starter. Always refer to the specific scooter's wiring diagram for exact connections.
13
can u ride a 49cc gas scooter on the road without Georgia operatator licences