you have to first take the jug and the head off and once that is off take a really small screw drive and pop one of the wrist pin locks off adn slide the wrist pin out of the piston then put a new piston on insert the wrist pin and the lock adn reinstall jug and head... done ... about a 20 min job if your quick
You cant find replacement parts for that bike, but if its for a piston... a honda CR 125 dirt bike piston will help and fit, heights and dimensions are to the notch the exact same...
To install piston rings on a Yamaha Breeze 125, first ensure the piston is clean and the rings are oriented correctly, with the marking or gap positioned as specified in the service manual. Gently compress the rings using a ring compressor or your fingers to fit them into the piston groove. Carefully insert the piston into the cylinder, ensuring the rings do not get pinched or damaged. Once the piston is in place, you can proceed with reassembling the rest of the engine components.
No, you can't. Because the two engines are not of the same size. The 250 cc engine is bigger than the 125 cc engine, so things will not fit between them.
The piston ring size for a 1989 KTM 125 SX typically uses a 54mm piston. However, it's essential to verify the specifications in the service manual or consult with a parts supplier, as variations can exist based on engine modifications or specific production runs. Always ensure you're using the correct size for optimal engine performance.
I have always heard the Jug being referred to as the Cylinder and/or piston assembly including the cylinder.
lol. nowhere. i cant find for mine anywhere to tell u the truth
yes but the honda cr 125 is a 2 stroke
The mixture would be 20 to 1 for a Honda 125 2 stroke
the applied for honda cg-125 is 87,000 ruppes in lahore
honda wave and honda xrm is same engine,.. it depends on the driver but xrm and wave is beaten by my kawasaki aura,..
The Honda 125 is not bigger than a Honda 230 4 Stroke if the only difference is the size of the motor. The Honda 125 is actually a taller motorcycle than the Honda 230 4 Stroke when size is considered in inches from the ground to the seat.
The Honda NSR 125 has a two stroke engine with a displacement of 124 cc. The Honda NSR 125 has 15 horsepower and rotates at 9500 revolutions per minute.