Lightly operate the kick lever until it becomes difficult, this puts you on the compression stroke, then give it a solid kick.
Some bikes have a decompression lever that reduces the engine compression to make kick-starting easier.
Yes
No if it says 4 stroke or 4 cycle you can not put it in a 2 stroke or 2cycle engine.
swap engines. they work completely differently and cannot be changed.
a four stroke has a timing chain and a cam and a two stroke doesnt a two stroke has reed valves
2 stroke, 4 stroke, and rotary (although this one hasn't been made for a while).
i don't think it has 4 gears it has five according to mine You put fuel in the tank and put oil in the crank case on a 4 stroke motor cycle.
Your timing is off in most cases, or your carburetor needs adjusting.
I think 60mph to 65mph approx. is the top speed for this bike.motorcyclesdir.com/
Any motorcycle oil with the weight 20W50. I use Valvoline 4 stroke motorcycle oil 20W50 and it works fine!
not completely sure what the question is asking butr i believe it is asking why is the 4-stroke engine taking over the makrket.I believe it is because of the even power they make as trhe 2-stroke has a strong powerband which can make the bike more difficult to ride/race.the 4-stroke is unfair in its way b/c the 250cc 4-stroke races with the 125cc 2 stroke.
Any 4-stroke 10W-30 motorcycle oil can be used in clutch case.
Usually the average is about 4 ounces of oil per gallon of gas