To put a weedeater engine in a power wheel, first ensure that the engine is compatible in size and power for the vehicle. Remove the existing motor from the power wheel and prepare the weedeater engine by securing it with brackets or mounts to fit the chassis. Connect the throttle and ignition systems appropriately, ensuring safe wiring. Finally, test the setup for stability and functionality before use.
indicated power is maximum out put power of the engine brake power is the... brake power =T*W T=torque W= angular velocity of wheel indcated power =BHP+Friction. Mechanical Efficiency :- BHP/IHP
You don't.
NO YOU CANNOT DONT TRY IT!!!!If you do,the intrepid will run great for about um....an hour,then it will fall apart.its like putting reg. gas in a weedeater,good running until it burns out the engine.
If you accidentally put regular gasoline in your oil-gas weedeater, do not start the engine. First, remove the fuel tank cap and drain the contaminated fuel completely. After draining, you should flush the tank with the correct fuel mixture of gasoline and oil to ensure all residue is removed. Finally, refill the tank with the proper oil-gas mixture and check for any issues before starting the engine.
Sae 30w
String got under shaft
no it is too big
It is possible to put on a turbocharger but make sure you also put a tune on the engine and pair it with an intercooler.
Re-build your diesel. Put on a custom chip and that will make up for engine power loss.
You Tube has videos for nearly anything. I have had great success as I own a 775r.
put a vtr or vts engine in it
yes