0
The first number is the diameter of the bolt in millimeters and the second is the length in millimeters.
So just like a 1/2 x 6 US bolt is 1/2 inch in diameter and 6 inches long...
a 6x14 metric bolt will be 6 millimeters in diameter and 14 millimeters long.
There is another measurement you may have to worry about with larger sizes. Namely the thread pitch. In metric you typically only see fine thread bolts starting at 8mm (8 millimeter diameter) and up.
You may see measurements like 8 x 1.0 x 40. This would be an 8mm diameter bolt 40mm long with a 1.0 thread pitch. The standard pitch for 8mm bolts is 1.25 so this would be a fine thread bolt.
What else can I help you with?
How do you find dimensions?
You take a ruler or tape measure and measure the dimensions you need.
How do you measure a dimensions of a door?
With a tape measure
What are the dimensions of a pint?
A pint is a measure of volume so its dimensions are [L3].
What do you measure to get volume?
The dimensions of the container.
How can I accurately measure the diameter of motorcycle handlebars?
To accurately measure the diameter of motorcycle handlebars, use a caliper tool to measure the width across the handlebars at the center point. This will give you the precise diameter measurement.
What is the standard tile measure used for determining the dimensions of a room?
The standard tile measure used for determining the dimensions of a room is square feet.
How do you find areas in Cm2?
Measure the linear dimensions in cm and then calculate the area using the appropriate formula. or measure the linear dimensions in metres, calculate the area and mutiply by 10000 or measure the linear dimensions in millimetres, calculate the area and divide by 100.
How many pounds is this 920mmx70kg?
This question cannot be answered. A pound is a measure of mass and so has dimensions [M]. A kilogram is a measure of mass and so has dimensions [M]. A millimetre is a measure of distance and so has dimensions [L]. So a mm * kg has dimensions [ML]. There is a mismatch in dimensions between pounds and mm*kg which means that any conversion between the two is not valid.
How do you know that you have health dimensions?
you can measure it with a ruler.
How do you know that you have a health dimensions?
you can measure it with a ruler.
How do you get the dimensions of a rectangular table?
You measure them, using a ruler or tape measure or similar.
How loud can a motorcycle be?
Your ears will find out that the closer you are to the motorcycle the louder the noise will be. We measure the sound pressure by a SPL meter.
