answersLogoWhite

0

On the left side of 4 wheeler, remove the kick starter. Remove the for bolts holding the floorboard on. Next remove the combination of bolts and push pins holding the side body cover fairings on. You will now unbolt the black metal clutch cover. Once removed, you will see a front pulley belt set up and a rear clutch set up. Remover the 17 mm nut on the FRONT pulley using an impact gun. Without an impact, you will need to hold the the pulley to keep it from turning as you remove the pulley. Be careful not to break the fins on the pulley if you do not use an impact.

Once the bolt is off, slide the pulley off and there will be the wide limiting collar on the shaft. Remove the collar and reinstall the pulley, and above parts in reverse order.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What is the maximum noise reduction provided by ear plugs?

Ear plugs can provide a maximum noise reduction of around 30 decibels.


What is a speed reduction kit do?

A speed reduction kit is a device or system installed on a vehicle to limit its maximum speed. This is commonly used in industrial or commercial settings to improve safety and reduce accidents by ensuring vehicles cannot exceed a certain speed limit.


What is the maximum amount of physical memory that can be installed on this device?

The maximum amount of physical memory that can be installed on this device is 16GB.


What are the highest NRR earplugs available on the market for maximum noise reduction?

The highest NRR earplugs available on the market for maximum noise reduction are typically rated at around 33 decibels.


What are the highest NRR ear plugs available on the market for maximum noise reduction?

The highest NRR ear plugs available on the market for maximum noise reduction are typically rated at around 33 decibels.


What is the maximum number of drives that can be installed?

the maximum number of drives that can be installed depends upon how many drive bay slots your case has and how many SATA connections your motherboard has.


What is the maximum allowable noise level reduction in a recording studio when using a 20db noise-cancelling system?

The maximum allowable noise level reduction in a recording studio using a 20dB noise-cancelling system is 20 decibels.


What is the maximum height a smoke detector can be installed?

at 10.2 meters height


What is the maximum length of a lead flashing?

I installed 20,000 lineal feet


What is the maximum steering angle for a golf cart?

The tow in should be set to 1/4" measured with the tires installed. Castor is factory set. Camber should be 0 but can be changed with the shock on a Yamaha. Club Car and EZ-GO cannot be changed.


What is the maximum next that can be supported for a 500mhz channel if you have installed a cat6 cable?

26.1


What is the maximum amperage rating of a Federal Pacific breaker that can be safely installed in a residential electrical panel?

The maximum amperage rating of a Federal Pacific breaker that can be safely installed in a residential electrical panel is typically 60 amps.