take bolts out at front left and right side then slide entire seat forward and lift off
To remove the seat on a 1981 Yamaha XV750, first, locate the seat lock mechanism, typically found near the back of the seat. Use a key or a flathead screwdriver to unlock it, then lift the rear of the seat upwards. Gently slide the seat towards the rear of the bike to disengage it from the mounting points at the front. Be cautious with any wiring or components that may be attached to the seat.
xv750
A person can remove the seat on Yamaha BW350 motorcycle by depressing the release under the edge of the seat. The seat can then be raised and removed from the bike.
The Yamaha 1200 motorcycle seat is held in place by four retaining bolts. Remove the retaining bolts and the seat will come off.
The seat on a Yamaha BW80 motorcycle is removed by taking out the retaining screws under the lip of the seat. It can then be raised up and detached from the hinges.
Remove a bolt (hex) from either side at the bottom of the seat. Near the shock.
Remove the 10mm bolt from behing the rear seat. Then pull the rear seat it hooks to the front seat in the front. Remove the bracket there and pull the front.
key unlocks top section(pillion) which exposes nuts at the rear of main seat. unscrew and slide seat backwards, this will remove the seat.
Yes, you may remove the back seat saddle bags and visor from a 1988 Yamaha. You will need to unscrew the bolts attached to the back seat and visor.
It appears to have the same part number. I compared a 1990 xv750 with a 1986 xv700 and they both have Yamaha part number 3CF-24730-10-00. I have an '86 xv700 so I'm always shopping for interchangeability. I use bikebandit.com or servicehonda.com for their OEM part finders. I can select my Virago and get the part number then start comparing to other models and years of the Virago. Helps a lot with searching online and on ebay for parts.
To remove the seat on a Yamaha Vino, locate the seat latch under the rear of the seat. Pull the latch upward while simultaneously lifting the back of the seat. Once the latch is released, the seat will detach from its hinges, allowing you to remove it completely. Be sure to check for any additional fasteners or clips if applicable, depending on the specific model year.
To remove the seat on a Yamaha 350 Big Bear, locate the seat release mechanism, which is typically a latch or bolts at the rear of the seat. For models with bolts, use a wrench to unscrew them. For latch mechanisms, pull the latch up or slide it to release the seat. Once the latch or bolts are disengaged, lift the seat off the frame to remove it.