To remove the seat on a Suzuki Intruder 1400, first, locate the seat release mechanism, which is typically a bolt or latch under the rear of the seat. Use a suitable tool, like a socket wrench, to unscrew the bolt or pull the latch. Once released, gently lift the seat from the rear and slide it forward to detach it completely from the bike. Make sure to check for any additional clips or fasteners if the seat feels secure.
Yes, you just need to remove the center bracket (back seat bracket) on your bike
To remove the driver's seat on a 2007 Suzuki 800c Intruder you need to remove the headrest and remove the screws. Next, remove the bolts and washer on each side of the front of the driver seat.
On a 2003 Suzuki 1400 Intruder, the fuse is typically located under the seat. To access it, remove the seat by unscrewing the bolts that hold it in place. Once the seat is off, you should find the fuse box, which contains the fuses for the electrical system. Always refer to the owner’s manual for specific details regarding fuse types and locations.
On a 1996 Suzuki Intruder 1400, the fuses are typically located under the seat or near the battery compartment. To access them, you may need to remove the seat or a side panel. The fuse box contains various fuses for different electrical components of the motorcycle. Always consult the owner's manual for specific locations and fuse ratings.
The fuse box on a 2003 Suzuki Intruder 1400 is typically located under the seat. To access it, you’ll need to remove the seat by unscrewing the bolts or fasteners that hold it in place. Once the seat is off, you should see the fuse box mounted on the frame or near the battery area. Always refer to the owner's manual for specific details and diagrams.
on a 1999 sukuki 1400 intruder, its inside the left side panel, under a black plastic lid/panel held on by a phillips screw. You will have to remove the seat to get the side panel off. Im pretty sure the 96 & 99 are the same.
The fuses are located on the left (if your seated on the bike) under the panel that says intruder. You need to remove the seat completely first. you will then find 2 small screws holding the panel in place. Remove them. Underneath there is a small box with fuses written on it.
I believe the main seat has 2 screws or bolts at the back...the passenger i think has 2 screws which you undo under ur mudguard..put your hand under and you will feel 2 little nuts. hope it helps..i to am a 1400 owner.
The main fuse on a 2003 Suzuki Intruder 1400 is typically located under the seat or behind a side cover on the left side of the motorcycle. You will need to remove the seat or the side cover to access the fuse box. Once located, the main fuse can be identified by its rating and is usually a glass tube fuse. Always consult the owner's manual for specific details and safety precautions.
remove the seat and the main bolt is there and look between the handle bars and the tank for the other screw.
underneath the seat where it meets with the bottom of the tank
On a 1997 Suzuki Intruder 800, the fuse box is typically located under the seat. To access it, you'll need to remove the seat by unscrewing or unclipping it, depending on the model. Once the seat is removed, you should see the fuse box mounted on or near the battery compartment. Always refer to the owner's manual for specific details and safety precautions.