0
To remove the flywheel on a 1998 Fat Boy Harley, you will need a flywheel puller and some basic tools. Here's what to do:
- Make sure the bike is in Neutral.
- Disconnect the wires from the primary cover.
- Remove the primary cover.
- Remove the bolts holding the flywheel down.
- Use the flywheel puller to remove the flywheel from the crankshaft.
Once the flywheel has been removed, you can now replace it with a new one. Make sure to use the same bolts to secure the flywheel to the crankshaft, and reconnect the wires to the primary cover.
What else can I help you with?
Will a gas tank from a 1998 Harley fat boy fit a 1998 Harley softail fxstc?
no
Can you exchange 2008 Harley Heritage wheel bearings from a 2008 rim with 2005 wheel bearings to fit my 2005 harley fat boy?
Yes.
How do you remove the front forks on a 2004 harley Davidson fat boy?
To remove the front forks on a 2004 Harley Davidson Fat Boy, first, ensure the motorcycle is securely supported and the front wheel is off the ground. Next, remove the front wheel by loosening the axle nut and removing the axle. Then, detach the brake calipers and the fender if necessary. Finally, loosen the triple tree clamps and slide the forks out from the frame.
How do you replace starter on 1998 Harley fat boy?
disconnect the battery, pull the primary cover and remove the jack shaft, You will need a 1/4 Allen socket to get to the starter bolts. remove battery pos cable from starter and remove
Looking for a wiring diagram for the charging system on a 1998 harley Davidson fat boy?
in the manual
Where is the oil drain plug of a 1998 Harley Fatboy?
The oil drain plug on a 1998 Harley Fat Boy is located on the bottom of the engine's oil pan, typically towards the rear. It's a hex-headed bolt that you can access from underneath the bike. Make sure to have a suitable container ready to catch the oil when you remove the plug. Always refer to the owner's manual for specific details and torque specifications.
Where is the turn signal module on 1998 Harley Davison fatboy?
On a 1998 Harley-Davidson Fat Boy, the turn signal module is typically located under the seat. To access it, you’ll need to remove the seat and may also need to remove the side covers or other components depending on your bike's configuration. The module is usually housed within the wiring harness near the rear fender area. Always consult the service manual for specific details and guidance.
Where are the fuses on a 2001 Harley Fat boy?
underneath the seat. remove the seat and you'll see the black fuse and relay box
How do you remove the battery on a 2002 harley Davidson fat boy?
To remove the battery on a 2002 Harley Davidson Fat Boy, first, ensure the motorcycle is turned off and parked on a stable surface. Remove the seat by unscrewing the bolts or latch, then locate the battery cover and remove it if applicable. Disconnect the negative (-) terminal first, followed by the positive (+) terminal, and then carefully lift the battery out of the compartment. Be cautious of any acid spills or corrosion, and handle the battery with care.
Where is theTurn signal module on 1998 harley fatboy?
On a 1998 Harley Fat Boy, the turn signal module is typically located under the seat or behind the side cover. It's usually mounted near the rear fender or near the wiring harness that connects to the turn signals. To access it, you may need to remove the seat or side cover, depending on the specific configuration of your bike. Always refer to the owner's manual for detailed instructions and diagrams.
How much does a Fat Boy Harley Davidson cost?
There are such a different price for a Fat Boy Harley Davidson. This depends on the place one is going to buy. However, the average price for a Fat Boy Harley Davidson is around 16,500 dollars.
What kind of oil filter for Harley Davidson fat boy 1998?
For a 1998 Harley Davidson Fat Boy, you typically need a Harley Davidson OEM oil filter, specifically the part number 63796-99. Alternatively, high-quality aftermarket options like the Screamin' Eagle or K&N KN-171C oil filters can also be used. Ensure the filter is compatible with the Evolution engine to maintain optimal performance. Always double-check your owner’s manual for specific recommendations.
