0
What else can I help you with?
How do you remove the rear gear of mongoose rebel 20 bike?
I'm assuming you're asking about how to remove the freewheel, as the Mongoose Rebel 20 is a single-gear BMX. In that case you need the correct freewheel puller to get the freewheel off. Check out www.parktools.com for more info.
What is better a 9t bmx freewheel or a 14t bmx freewheel?
It's not really a question of better, more of different. What decides how fast the top speed of the bike is, and how nippy it is off the start is the ratio between the tooth count of the crankset, and the tooth count of the freewheel. With a smaller freewheel you can have a smaller crankset, a slightly lighter bike and get the same feel of the bike as with a bigger crankset and a bigger freewheel.
What tool do you need to remove a bmx freewheel?
you need a freewheel remover. but if you don't want the freewheel anymore a vise also works too but don't clamp it down to hard just get it snug then spin the wheel so it spins off the freewheel cause some bike shops charge like 2-5 bucks to take it off
What are the best features to look for in a freewheel mountain bike for off-road adventures?
When looking for a freewheel mountain bike for off-road adventures, consider features like durable frame material, suspension system for smooth rides, reliable braking system, wide and grippy tires for traction, and a comfortable saddle for long rides.
How do you take the govern off a 49cc pocket bike.?
brake it off haha
Can you ride a pocket bike in Oregon?
You cannot ride a pocket bike in the state of Oregon on roads and highways. They should only be used for off-road purposes. If you do ride a pocket bike on roads, you may be subject to a fine.
What is the purpose of a bike lockring and how does it contribute to the security of a bicycle?
A bike lockring is a small metal ring that secures the cassette or freewheel to the hub of a bicycle's rear wheel. It prevents the cassette or freewheel from loosening or coming off while riding. This contributes to the security of a bicycle by ensuring that the rear wheel remains properly attached to the bike frame, reducing the risk of theft or damage.
What is the process for rear hub replacement on a bicycle?
To replace the rear hub on a bicycle, you will need to remove the wheel from the bike, then take off the cassette or freewheel. Next, unscrew the axle nuts or quick release skewer to release the hub from the dropouts. Install the new hub by reversing these steps, making sure to properly adjust the bearings and reattach the cassette or freewheel. Finally, reattach the wheel to the bike and ensure everything is tightened and aligned correctly.
How do you make a pocket bike faster?
take parts off that u dont need to make the pocket bike go faster LOOSE SOME WEIGHT OR BUY PERFORMANCE PARTS remove the muffler, remove plastic pieces that are not needed, bore out the cylinders and get bigger pistons, swap sprockets or get a smaller rear sprocket. (this will make it slower off the line but significantly increase top speed. just like a mountain bike in low gear)
How do you get mongoose rebel back gear off?
Depends on if it's a freewheel or a freehub design. For a freewheel you need the appropriate freewheel puller. For a freehub you need a splined lockring tool.
Why does your 49cc pocket bike turn off when im about to take off?
You have to clean the carburetor usually that's the main problem
How do you fix the sprocket on a mountain bike?
Sounds like the freewheel (the clutch prom). You need a special tool to remove it in order to be able to replace it with a new one you can find the tool at a shop near you most of all have them
