The helmet lock key hole turns in both directions Counter (anti)-clockwise opens the helmet lock, Clockwise pops the locking mechanisms in the seat. You then lift the back of the seat up and pull the whole thing backwards.
You can purchase a Suzuki GSXR1100 carburetor from eBay, The price will vary on the condition of the item, also some of them may be for a local pick up, only. Be sure to read the details.
To remove the driver's seat on a 2007 Suzuki 800c Intruder you need to remove the headrest and remove the screws. Next, remove the bolts and washer on each side of the front of the driver seat.
Its under the rider's seat. You have to remove th seat.
you must remove the bolt behind the rear seat and remove the rear seat then you will see 2 small Allen head bolts remove them and the seat will come right off.
You have to remove the Allen bolt on the rear of the passenger seat, then remove the two Allen bolts exposed when you removed the passenger seat. The driver seat should slide back and off now.
Yes, you just need to remove the center bracket (back seat bracket) on your bike
Use your key on the left side by the seat. turn it counterclockwise. and the front seat should pull off. Once you remove the front seat there are two releases to remove the rear seat.
You can remove the off a Suzuki 230 4 wheeler by locating the mounting bracket on the floor of the vehicle. Once you find that, you can remove the screws in the plate with a Phillips head screw driver, and take the seat out.
To remove the back seat of a 2005 Suzuki Forenza, first, locate the release mechanisms at the base of the seat. Pull up on the seat cushion to unclip it from the floor, and then lift it out. For the backrest, locate the bolts or clips securing it to the vehicle, usually found at the bottom or sides, and remove them. Once unbolted, you can lift the backrest out of the vehicle.
To remove the third-row seat from a 2006 Suzuki XL-7, first, locate the release levers or bolts securing the seat to the floor. Fold the seat down to access these fasteners more easily. Once released, carefully lift the seat out of its mounting points and remove it from the vehicle. Ensure to check for any wiring or connectors if the seat has integrated features like seat belts.
i own a 87 suzuki savage i would expect it is the same steps there is two screws that hold the seat on there located towards the rear of the drivers seat not the passengers seat after removeing the two screws the seat should lift free there is one screw under the drivers seat that holdes the passenger seat on remove that and push the passenger seat forward and lift
You need to remove the rear seat before you can removed the front. First removed the one screw on the back of the rear seat then removed the two screws on the front of the rear seat. You can not get to the front screws until you remove the rear screw.