there should be two bolts on the front of the seat right below it, they should be an Allen key but most of the time they have ben lost and replaced with regular bolts.. after you remove them,, then slide the set forward just a hair and it should remove..
To remove the seat on a 1997 Yamaha Virago 750, locate the seat release mechanism, which is typically a bolt or latch at the rear of the seat. Using a suitable tool, like a socket wrench or screwdriver, loosen and remove the bolt or disengage the latch. Once released, gently lift the rear of the seat upwards and slide it towards the rear of the bike to detach it completely. Be sure to store any removed hardware in a safe place for reinstallation.
To remove the reserve fuel tank on a 1998 Yamaha Virago 1100, start by disconnecting the battery to ensure safety. Then, remove the seat and side covers for better access. Disconnect the fuel lines and any electrical connectors attached to the tank. Finally, unbolt the tank from its mounts and lift it off carefully.
On a 1986 Yamaha Virago 1100, the fuse box is typically located under the seat. To access it, you will need to remove the seat by unscrewing the bolts that hold it in place. Once the seat is removed, the fuse box can be found near the battery, usually covered by a protective cover. Always consult the owner's manual for specific details and diagrams.
To remove the keyed ignition on a 95 Yamaha Virago 1100, kindly refer to your user manual.
The main fuse on a Yamaha Virago 750 is typically located under the seat or near the battery. To access it, you may need to remove the seat or a side cover. The fuse is housed in a small holder and is usually a glass or blade-type fuse. Always consult the owner's manual for specific details regarding your model year.
On a 1992 Yamaha Virago 750, the fuse box is typically located under the seat. To access it, you need to remove the seat, which is usually secured by bolts or a latch. The fuse box is housed in a plastic cover, which you can lift off to access the fuses. Always consult the owner's manual for specific details and safety precautions.
Well, when removing the battery from a Yamaha Virago 1100, you'll want to start by locating the battery compartment. Once you find it, carefully disconnect the negative (-) and then the positive (+) terminals. After that, you can gently lift the battery out of its place, making sure to handle it with care. Remember, it's all about taking your time and being gentle, just like painting a happy little tree.
To remove a restrictor kit from a Virago 535, first ensure the motorcycle is turned off and cool. Access the carburetors by removing the seat and side panels. Locate the restrictor kit components, typically found in the carburetor or exhaust system, and carefully remove them. Reassemble the motorcycle parts, ensuring all connections are secure, and test the bike to ensure it runs properly without the restrictors.
Sometimes I have found a couple Virago's where the Seat ISN'T held down by bolts at all but a latch kinda like a latch to a cars hood. Remove the Left side cover. In the Middle of the seat, where the rider and passenger point is; there is two metal pieces protruding downward. Feel for the one in the back. Push it forward. This latch is attached to a rod that goes to the other side so by rotating the left side it also unlatches the right side. I hope this helps someone else!
The drain plug on a 1981 Virago 750 on the underneath part of the radiator. You will need to remove a bolt to drain it.
the Yamaha symbol underneath your headlight is your fuse box, remove the two screws and there they are. there are also some relays underneath your seat if you havn't already found those.
two bolt under the front seat left side and right side. they will be a metric Allen head