To remove the seat on a 2006 Harley Fat Boy CVO, start by locating the seat release mechanism, typically a bolt or quick-release latch at the back of the seat. Use a socket wrench or your hands to loosen or unfasten this mechanism. Once released, gently lift the seat from the front and slide it back to disengage it from the frame. Ensure all wiring, if any, is carefully disconnected before fully removing the seat.
Yes it should fit up till 99
remove seat, remove neg cable from frame and Pos from battery, remove strap and take out battery.
Remove the rear seat screw. Then pull the rear seat to the rear and slightly up. It is held in by two metal tabs that slip under the front seat lip.
There are 3 flat head screws to remove. One is at the rear of the passenger seat. one each under the side flaps of the seat. after removing the 3 screws, pull seat to the rear to remove from tongue.
remove the seat
The fuse block on a Harley Fatboy 93 is commonly found under the driver's seat. This is where you will find the fuses for various functions in the the car.Ê
under the seat, aft of the battery
remove the bolt at the rear of the seat and remove the seat. the battery is under there
how do I remove the front seat from a 1991 fatboy
On a 2010 Harley Fat Boy, the fuse box is typically located under the seat. To access it, you need to remove the seat by unscrewing the bolts or quick-release mechanisms. Once the seat is removed, you should see the fuse box mounted on the bike's frame. Always refer to the owner's manual for specific instructions and diagrams.
yes
To remove the seat on a Harley Davidson Road King, you must unscrew the Philips head screw that is directly behind the seat. Then, slide the seat and unfasten the hook at the front of it.