To install a 2000 Yamaha Waverunner XL 1200 starter, first remove the 2 bolts. Then the wires connected to the starter. Remove the starter and replace with new.
Heres a UTUBE on it http://www.youtube.com/watch?v=bQ7nyMRnBIM
Begin with disconnecting the negative battery terminal. Remove the two bolts that hold the starter in place and also unfasten and remove the starter motor cable. The starter is easily pulled out.
NO, the clutch for the starter is internal. The clutch is on the gear that engages the starter gear.You have to remove left side engine case and remove flywheel to access starter clutch assembly.
To remove the battery from a Yamaha Royal Star 1300, first, ensure the motorcycle is turned off and parked on a stable surface. Locate the battery compartment, typically under the seat or side panel. Remove the seat or panel by unscrewing any fasteners, then disconnect the negative (-) terminal first followed by the positive (+) terminal. Finally, lift the battery out of its compartment carefully.
To change the starter on a Yamaha Kodiak, first disconnect the battery to ensure safety. Remove the starter motor by unscrewing the mounting bolts and disconnecting the electrical connections. Install the new starter by reversing the process: connect the electrical terminals and secure the starter with the bolts. Finally, reconnect the battery and test the new starter to ensure it's functioning properly.
To change the starter on a 1995 Yamaha Waverunner 760, first disconnect the battery to ensure safety. Remove the engine cover and locate the starter motor, typically mounted near the flywheel. Disconnect the electrical connections and bolts securing the starter, then carefully remove it from the engine compartment. Install the new starter by reversing the removal process, ensuring all connections are secure before reattaching the battery and testing the unit.
It's a real pain. I had to bend the head of a wrench to get at one of the 4 bolts holding it in. If you have the engine out, it's real easy. A lot of times the starter is the not the problem on these bikes. The starter bendix that is behind the clutch is the problem if you hear grinding when you try to use the starter.
To replace the starter motor on a Yamaha Kodiak 400 ATV, first disconnect the battery to ensure safety. Remove the starter motor cover and the old starter motor by unbolting it from the engine. Install the new starter motor in the same position, securing it with bolts, and then reattach the starter motor cover. Finally, reconnect the battery and test the new starter to ensure it functions properly.
To remove the starter from a Yamaha XV 1100 Virago, first disconnect the negative battery terminal to ensure safety. Remove any necessary components obstructing access to the starter, such as the side cover or exhaust pipes. Then, unbolt the starter from the engine case, typically secured by two bolts, and disconnect the electrical connectors. Finally, carefully pull the starter out of its position for servicing or replacement.
.035
There are a few online resources that offer information about the Yamaha FJR 1300, including Motorcycle News, Gogo Cycles, Rider Magazine, Web Bike World, and The Old Bloke.