it is very easy only with 2 bolt and power wire
how do you set the valves & what are the adjustments for the valves on a 2007 suzuki eiger 400
22hp
on the frame
Um... not sure
.031
10-w40 non synthetic
82MM is standard bore and 71.2MM is the Stroke
It depinds a atomatic gos 60 a shift goes 80
Alot if u takecare of it. Oil changes....etc.
The Vin number is situated on the frame above the rear left tyre.
The Suzuki Eiger 400 typically requires about 2.5 quarts (or approximately 2.4 liters) of oil for an oil change, including the oil filter. Always refer to the owner's manual for the most accurate specifications and recommendations. Make sure to use the correct type of oil for optimal performance.
To change the spark plug on a 2004 Suzuki Eiger 400, first, ensure the engine is cool and disconnect the negative battery cable. Remove the spark plug cap and use a spark plug socket to unscrew the old spark plug. Before installing the new spark plug, check the gap and adjust it if necessary. Finally, screw in the new spark plug, reconnect the spark plug cap, and reattach the battery cable.