If you look under the seat you shold see a keyhole. Just insert your key and it comes off with ease.. I had the same problem when I first got my GSXR too lol..
The filter for the cab of a vehicle is usually under the cowl. It can be visible or encased in it's own box. Usually on the passenger side. remove wipers, unscrew cowl and remove! locate housing and undo it to access filter.
In order to see the PCM, you will first need to remove the cowl from the vehicle. Once you have removed the cowl, the PCM is located on the passenger side, up at the top corner near the firewall.
To access the PCM, you need to remove the cowl. Once the cowl is off, you will see the PCM up in the far corner on the passenger side near the firewall
It comes through the wiper cowl on the passenger side.It comes through the wiper cowl on the passenger side.
The cabin air filter is located on the passenger side of the cowl. After opening the hood, remove the windshield wipers and the black covering ( 2 small T-30 screws, and a few body grommets). After you remove the cowl there will be a grey accordion looking filter in the cowl, remove that and replace with the new filter.
Open the hood. The ports are under the cowl, on the passenger side, up near the firewall. You can see them thru the vents in the cowl. To lift up the cowl you have to remove the weatherstripping, at least a few feet to allow lifting up the cowl. They're right there.
* Remove the windshield wiper arms * Remove the retaining fasteners securing the cowl cover * Remove the right side cowl cover then the left side
If equipped, there is a door in the wiper cowl, base of the windshield, passenger side.If equipped, there is a door in the wiper cowl, base of the windshield, passenger side.
It is located under the hood, far rear, passenger side. You have to remove part of the plastic cowl to access it.
It is called the Cowl or Cowling.
It is located in the passenger side cowl where the intake vent is just below the windshield. You will need to remove the screws to get to it.
Passenger side of the car, below the windshield, under the black plastic cowl cover. You must raise the hood, un-clip the windshield washer hoses on the passenger side, remove 3-4 black plastic screws, and remove the plastic cowl cover from the passenger side. You will then see the access to the filter. If you will purchase a Purolator Cabin Filter it comes with complete instructions.