all harleys require the seat to be removed to access the battery.
remove the seat
Remove the Seat.
2 bolts to the left of the battery box. One is below the ignition (goes up and down) the other is directly below that (screws out from the bike). Loosen and remove the screws and battery box will drop down and chrome peices will pull out.
To remove the battery on a 2002 Harley Davidson Fat Boy, first, ensure the motorcycle is turned off and parked on a stable surface. Remove the seat by unscrewing the bolts or latch, then locate the battery cover and remove it if applicable. Disconnect the negative (-) terminal first, followed by the positive (+) terminal, and then carefully lift the battery out of the compartment. Be cautious of any acid spills or corrosion, and handle the battery with care.
Remove seat, un bolt the battery, pull up and remove. Put a new one in, bolt the two knots and replace the seat!
remove seat. remove two bolts holding bracket on left side of battery tray remove top bolt visible after seat is removed in step 1 disconnect battery leads remove battery
On the rear fender, undo the single screw. Then lift the seat, slide it back, and, finally, remove it. When you see the battery, undo the negative and positive terminal. Remove the battery from the box. Refit the battery doing the opposite of what you did when you removed the battery.
battery removal of 2004 harley dyna
In my harley devidson its immobilizer lock could you told me how to unlock
how do you remove the back wheel on a 2005 Harley Davidson Dyna low rider FXDL
How do you remove battery from 2013 roadking
Undo the single screw on the rear fender, lift, slide back and remove the seat. At the battery, undo the negative terminal, undo the positive terminal, remove the battery from the box. Refit is the reverse of removal.