Use a 9/16" Socket on a ratchet. There is one bolt in the center of the blade. Brace the blade with a block of wood to prevent movement. Loosen the bolt, remove the bolt and washers. Blade should come off easily now. Place your new blade in the spindle cradle and transfer the bolt and washers to it. Tighten with socket/wratchet.
It's that easy! Unless, the bolt is stripped, in which case the mower deck will need to go to a machine shop to get the bolt out.
Most lawnmowers loosen to the left. At least that's how I do it.
how do you change the blade from a troy bilt riding mower
You can lift a riding lawn mower with a car or floor jack in order to change the blades. Simply place the jack under the frame of the lawn mower but away from the blades to lift it. Then, block the mower up using bricks or concrete blocks.
lawn mower pros.
have u tried looking in the manual
Turn your blades off.
Most of the time on consumer mower they use single blades on the smaller mowers. (33" and smaller)
I do not have any schematics for the Kgro Power Prow riding mower. The blades have stopped engaging. Joe M
and open ended wrech an open ended wrench
2 21inch blades.
Right Hand
counterclockwise