0
what year, what model, what size? However, almost all harleys; put something it between the primary chain and the clutch hub like a piece of hard wood. Remove the nut holding the gear by turning it counter clock wise. If the chain is good, you will have to remove the front gear and the clutch hub with chain all at the same time. If you can remove the front gear from the chain without removing the clutch hub, the chain needs replaced.
What else can I help you with?
How do you remove a stuck breather gear from a Harley engine?
To remove a struck breather gear from a Harley engine you need to follow the instructions on the user manual.
How do you remove a starter on a rev tech motorcycle engine?
REMOVE OUTER PRIMARY COVER. REMOVE JACKSHAFT NUT( THE SMALL NUT ON THE SMALL GEAR TOP REAR) TWO SCREWS(BOLTS) THAT RUN INWARD THRU STARTER BELOW OIL TANK REMOVE STARTER FROM BACK OF INNER PRIMARY. IF YOU BUY A HARLEY DAVIDSON SERVICE MANUAL, THE PROCEDURE SHOULD BE THE SAME AS HARLEY'S. LAKELIZARD
How do you remove starter Harley Davidson Fatboy 1998?
you need to remove the left primary case and remove the gear from the end of the starter shaft. then you can remove the mounting bolts and the starter will slide out.
How do you remove camshaft gear on a 3406E cat?
To remove the camshaft gear on a 3406E Cat engine, you'll need to remove any objects obstructing the gear. Next, loosen and remove the retaining bolt holding the gear in place. Use a gear puller tool to carefully extract the gear from the camshaft. Exercise caution to avoid damaging the gear or camshaft during the removal process.
Does harley Davidson engine have to come out to replace rocker covers?
no it does not , remove speedo and dash ,remove tanks , and go to town .
Can you remove studs from rocker box and slide box off engine without removing engine harley shovel head?
yes
Must you remove the camshaft for timing gear replacement on a 1986 2.5 Chevy Celebrity?
Yes, you have to remove the camshaft from the engine to replace the timing gear. The timing gear is pressed both on and off of the camshaft using an arbor or other suitable press. Since there is not room to remove the camshaft in the car the engine has to be out of the car.
How do you adjust the gear shifter on a Harley Davidson roadking?
How to adjust the shifter on a Harley Davidson
Must you remove the camshaft to replace the timing belt of a 1989 Chevy Celebrity 4-cylinder?
no The Chevy Celebrity 4 cylinder engine doesn't use a timing belt, it uses a timing gear. To replace the gear it is necessary to remove the camshaft from the engine as it is a press job. To remove the camshaft it is necessary to remove the engine from the car.
What does Harley Davidson EVO stand for?
EVOEvolution Engine (Harley-Davidson Motorcycles)
How do you change the oil on a 2007 harley daviddson dyna?
Let engine cool. Remove dipstick/fill plug. Remove oil filter. Remove drain plug (underside of bike).
What speed would a new Harley Davidson be traveling in third gear?
under normal operation, and without lugging or over reving engine, 30-40 mph
