To the rear on the right hand side of the motorcycle is a small lock, that holds a safety chain for the seat, unlock this, about 3/4 of the way back under the seat on both sides is a small lever, pull these back and the seat will release, lift up and back to remove.
To refit reverse above, making sure the seat is square placing front of seat down first before sliding forward, push down to engage rear catches, remembering to replace safety chain in lock and LOCKING it.
To remove the seat of a 1983 CM 250 Custom, first locate and remove the screws or bolts securing the seat to the frame; these are typically found at the rear or under the seat. Once the fasteners are removed, gently lift the seat upward and back to disengage it from any hooks or tabs. Be cautious of any wiring or components that may be attached to the seat. If necessary, consult the service manual for specific details related to your model.
The size of the chain that goes on a Honda cm 250 is 104 links. The cm 250 originally had a belt drive, but the belts have been discontinued.
It is 250 cm which equals 2.5 m
250 cm is 8.2 feet.
250 cm = 2.5 meters. Explanation: 100 cm = 1 m. Therefore, 250 cm = 250/100 = 2.5 meters.
2,500 millimeters is 250 centimeters.
10 percent of 250 cm = .1 * 250 = 25 cm
250 cm equates to about 98.425 inches.
3.5714
250 cm = 2.73 yards (approx).
1 meter = 100 cm 250 cm / 100 cm = 2.5 m
250 cm equals 98.425 inches98.4251969 inches ==2.54 cm = 1 in (exactly)→ 250 cm = 250 ÷ 2.54 in = 98 54/127 in ≈ 978.425 in.98.4251969 inches ==2.54 cm = 1 in (exactly)→ 250 cm = 250 ÷ 2.54 in = 98 54/127 in ≈ 978.425 in.