To remove the seat of a Suzuki Freewind, first locate the seat release mechanism, which is typically found at the rear of the seat. You may need to unlock it using the key or a latch. Once released, gently lift the seat upwards from the rear and slide it towards the back to detach it completely. Be sure to check for any additional bolts or screws if it feels stuck.
To remove the driver's seat on a 2007 Suzuki 800c Intruder you need to remove the headrest and remove the screws. Next, remove the bolts and washer on each side of the front of the driver seat.
Its under the rider's seat. You have to remove th seat.
you must remove the bolt behind the rear seat and remove the rear seat then you will see 2 small Allen head bolts remove them and the seat will come right off.
You have to remove the Allen bolt on the rear of the passenger seat, then remove the two Allen bolts exposed when you removed the passenger seat. The driver seat should slide back and off now.
Yes, you just need to remove the center bracket (back seat bracket) on your bike
Use your key on the left side by the seat. turn it counterclockwise. and the front seat should pull off. Once you remove the front seat there are two releases to remove the rear seat.
You can remove the off a Suzuki 230 4 wheeler by locating the mounting bracket on the floor of the vehicle. Once you find that, you can remove the screws in the plate with a Phillips head screw driver, and take the seat out.
To remove the third-row seat from a 2006 Suzuki XL-7, first, locate the release levers or bolts securing the seat to the floor. Fold the seat down to access these fasteners more easily. Once released, carefully lift the seat out of its mounting points and remove it from the vehicle. Ensure to check for any wiring or connectors if the seat has integrated features like seat belts.
i own a 87 suzuki savage i would expect it is the same steps there is two screws that hold the seat on there located towards the rear of the drivers seat not the passengers seat after removeing the two screws the seat should lift free there is one screw under the drivers seat that holdes the passenger seat on remove that and push the passenger seat forward and lift
You need to remove the rear seat before you can removed the front. First removed the one screw on the back of the rear seat then removed the two screws on the front of the rear seat. You can not get to the front screws until you remove the rear screw.
There's a lock on the left side at the bike. Turn it to the right and then push the seat forward and pull up
I turned both the key holes, pulled up on the seat, tried to slide, but nothing.